VirtualBox

2 年 前 建立

2 年 前 更新

#21573 new defect

WinHost and SCO OSR6 works in VBox6, fails in Vbox7

回報者: MarkBen 負責人:
元件: network 版本: VirtualBox-7.0.6
關鍵字: virtio 副本:
Guest type: other Host type: Windows

描述

Good morning, My office has run VBox (vs VMWare) for nearly a decade, issue-free.

HOST: Current host OS is Server2019 but cannot upgrade from VBox6.1.42 to ANY VBox7.x. Problem can be duplicated on host Win10.64 (source of attached log.zip).

Virtual OS is SCO Unix (OSR6DM1, fully licensed, patched). I posted my issue on VirtualBox.org in this (short) thread:

https://forums.virtualbox.org/viewtopic.phpf=6&t=109006&p=534055#p534055

I've included a log.zip that's also on that thread, and 'scottgus1' pointed out this from the log file: 00:00:44.916247 virtioNetR3Ctrl: Unrecognized CTRL pkt hdr class (80) 00:00:44.916297 virtioCoreVirtqAvailBufCount: Driver not ready 00:00:44.916607 virtioCoreVirtqAvailBufCount: Driver not ready 00:00:49.198793 Changing the VM state from 'RUNNING' to 'GURU_MEDITATION'

"Looks like maybe the virtio system is having trouble? Try reverting to 6.1.42, see if the VM comes back."

I can uninstall VBox7.x (either Win10 or Server2019), rollback to 6.1.42 and SCO Unix runs just fine. I've even tried fresh SCO installs over the weekend, tried changing #cores, RAM, deferring network setup (Bridged | paravirtualized(virtio-net)= 6.1.42 settings) etc to no avail. As soon as the install is completed and system reboots, SCO has a kernel-panic and immediately shuts down.

If there's anything else you'd like me to try, I'm willing to help address this!

Respectfully, MarkBen Mark Benavides, DDS Ottawa, IL

附加檔案 (4)

VBox.zip (73.6 KB ) - 2 年 前, 由 MarkBen 新增
vbox.log
VBox.2.zip (73.6 KB ) - 2 年 前, 由 MarkBen 新增
vbox.log
KernelPageFault.jpg (125.1 KB ) - 2 年 前, 由 MarkBen 新增
SCO Kernel Panic.jpg
VBox.3.zip (29.9 KB ) - 2 年 前, 由 MarkBen 新增
This zip is 6.1.42 which is SUCCESSFUL

下載所有附檔: .zip

更動歷史 (6)

2 年 前MarkBen 編輯

附檔: 新增 VBox.zip

vbox.log

2 年 前MarkBen 編輯

附檔: 新增 VBox.2.zip

vbox.log

2 年 前MarkBen 編輯

附檔: 新增 KernelPageFault.jpg

SCO Kernel Panic.jpg

2 年 前MarkBen 編輯

附檔: 新增 VBox.3.zip

This zip is 6.1.42 which is SUCCESSFUL

comment:1 2 年 前MarkBen 編輯

Good eve! Problem SOLVED (after emailing Xinuos) by changing Adapter type from Paravirtualized to INTEL Adapter.

I was able to create a 'test' system successfully, able to reboot (WITHOUT KERNEL PANIC!!), even able to update the OS with 'patchck.'

Hope this helps others using SCO OSR6; I'd consider this issue CLOSED

Regards, MarkBen

comment:2 2 年 前MarkBen 編輯

And GOOD morning!

Summary of a lot of horsing around yesterday afternoon and very early this AM on Server2019, after installing/using latest VBox 7.x:

NONE of the INTEL choices PREDICTABLY worked (but no kernel-panic, like virtio-net!). I would do the following to test:

  • VBox OFF, and change ‘Adapter Type’ from 1 of the 6 choices in VBox, working my way down from Para -> Intel -> PCNet-Fast III
  • Start in single user mode
  • #scoadmin network to delete existing NIC
  • Add recommended card that appears in #scoadmin network; add TCP/IP and assign same IP address
  • #scoadmin hardware and relink kernel
  • #reboot

I’m obsessive compulsive, but did NOT test PCNet-PCI II <G> since PCI III worked, and staff showed up and needed access to dental software residing on OSR6DM1.

HTH, MarkB

注意: 瀏覽 TracTickets 來幫助您使用待辦事項功能

© 2025 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette