source: vbox/trunk/src/VBox/ValidationKit/bootsectors/bs3kit/bs3-cmn-Trap16Init.c@ 60202

/* $Id: bs3-cmn-Trap16Init.c 60202 2016-03-26 23:45:22Z vboxsync $ */
/** @file
 * BS3Kit - Bs3Trap16Init
 */

/*
 * Copyright (C) 2007-2016 Oracle Corporation
 *
 * This file is part of VirtualBox Open Source Edition (OSE), as
 * available from http://www.alldomusa.eu.org. This file is free software;
 * you can redistribute it and/or modify it under the terms of the GNU
 * General Public License (GPL) as published by the Free Software
 * Foundation, in version 2 as it comes in the "COPYING" file of the
 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
 *
 * The contents of this file may alternatively be used under the terms
 * of the Common Development and Distribution License Version 1.0
 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
 * VirtualBox OSE distribution, in which case the provisions of the
 * CDDL are applicable instead of those of the GPL.
 *
 * You may elect to license modified versions of this file under the
 * terms and conditions of either the GPL or the CDDL or both.
 */

/*********************************************************************************************************************************
*   Header Files                                                                                                                 *
*********************************************************************************************************************************/
#include "bs3kit-template-header.h"


/*********************************************************************************************************************************
*   Global Variables                                                                                                             *
*********************************************************************************************************************************/
/* We ASSUME that BS3CLASS16CODE is 64KB aligned, so the low 16-bit of the
   flat address matches.   Also, these symbols are defined both with
   and without underscore prefixes. */
extern BS3_DECL(void) BS3_FAR_CODE Bs3Trap16DoubleFaultHandler80386(void);
extern BS3_DECL(void) BS3_FAR_CODE Bs3Trap16DoubleFaultHandler80286(void);
extern BS3_DECL(void) BS3_FAR_CODE Bs3Trap16GenericEntries(void);

/* These two are ugly.  Need data access for patching purposes. */
extern uint8_t  BS3_FAR_DATA bs3Trap16GenericTrapOrInt[];


BS3_DECL(void) Bs3Trap16InitEx(bool f386Plus)
{
    X86TSS16 BS3_FAR *pTss;
    unsigned iIdt;

    /*
     * If 386 or later, patch the trap handler code to not jump to the 80286
     * code but continue with the next instruction (the 386+ code).
     */
    if (f386Plus)
    {
        uint8_t BS3_FAR_DATA *pbFunction = &bs3Trap16GenericTrapOrInt[0];
#if ARCH_BITS == 16
        if (g_bBs3CurrentMode != BS3_MODE_RM)
            pbFunction = (uint8_t BS3_FAR_DATA *)BS3_FP_MAKE(BS3_SEL_TILED + 1, BS3_FP_OFF(pbFunction));
#endif
        pbFunction[1] = 0;
        pbFunction[2] = 0;
    }

    /*
     * IDT entries, except the system call gate.
     */
    for (iIdt = 0; iIdt < BS3_TRAP_SYSCALL; iIdt++)
        Bs3Trap16SetGate(iIdt, X86_SEL_TYPE_SYS_286_INT_GATE, 0 /*bDpl*/,
                         BS3_SEL_R0_CS16, (uint16_t)(uintptr_t)Bs3Trap16GenericEntries + iIdt * 8, 0 /*cParams*/);
    for (iIdt = BS3_TRAP_SYSCALL + 1; iIdt < 256; iIdt++)
        Bs3Trap16SetGate(iIdt, X86_SEL_TYPE_SYS_286_INT_GATE, 0 /*bDpl*/,
                         BS3_SEL_R0_CS16, (uint16_t)(uintptr_t)Bs3Trap16GenericEntries + iIdt * 8, 0 /*cParams*/);

    /*
     * Initialize the normal TSS so we can do ring transitions via the IDT.
     */
    pTss = &BS3_DATA_NM(Bs3Tss16);
    Bs3MemZero(pTss, sizeof(*pTss));
    pTss->sp0       = BS3_ADDR_STACK_R0;
    pTss->ss0       = BS3_SEL_R0_SS16;
    pTss->sp1       = BS3_ADDR_STACK_R1;
    pTss->ss1       = BS3_SEL_R1_SS16 | 1;
    pTss->sp2       = BS3_ADDR_STACK_R2;
    pTss->ss2       = BS3_SEL_R2_SS16 | 2;

    /*
     * Initialize the double fault TSS.
     * cr3 is filled in by switcher code, when needed.
     */
    pTss = &BS3_DATA_NM(Bs3Tss16DoubleFault);
    Bs3MemZero(pTss, sizeof(*pTss));
    pTss->sp0       = BS3_ADDR_STACK_R0;
    pTss->ss0       = BS3_SEL_R0_SS16;
    pTss->sp1       = BS3_ADDR_STACK_R1;
    pTss->ss1       = BS3_SEL_R1_SS16 | 1;
    pTss->sp2       = BS3_ADDR_STACK_R2;
    pTss->ss2       = BS3_SEL_R2_SS16 | 2;
    pTss->ip        = (uint16_t)(uintptr_t)(f386Plus ? &Bs3Trap16DoubleFaultHandler80386 : &Bs3Trap16DoubleFaultHandler80286);
    pTss->flags     = X86_EFL_1;
    pTss->sp        = BS3_ADDR_STACK_R0_IST1;
    pTss->es        = BS3_SEL_R0_DS16;
    pTss->ds        = BS3_SEL_R0_DS16;
    pTss->cs        = BS3_SEL_R0_CS16;
    pTss->ss        = BS3_SEL_R0_SS16;
    pTss->dx        = f386Plus;

    Bs3Trap16SetGate(X86_XCPT_DF, X86_SEL_TYPE_SYS_TASK_GATE, 0 /*bDpl*/, BS3_SEL_TSS16_DF, 0, 0 /*cParams*/);
}


BS3_DECL(void) Bs3Trap16Init(void)
{
    Bs3Trap16InitEx((BS3_DATA_NM(g_uBs3CpuDetected) & BS3CPU_TYPE_MASK) >= BS3CPU_80386);
}